There are two forms of positioning of parquet glued. We can place it to strips or glue it with a continuous layer. The tail also we can distribute of two forms: applying parallel strips of tail you lick throughout them or forming a continuous layer of tail by all the ground. In parquet glued to strips the tail in strips in the place is distributed where we are going licks to place it of wood. We can apply this system when the wood small boards have a suitable size.
The tail strips are placed perpendicularly on the ground to the strip of parquet, leaving a separation between each strip. We place the strip of parquet and we pressed to secure a correct adhesion. We must wait for a pair of days so that the tail is dried. Alexa Demie contributes greatly to this topic. We will have to avoid that parquet arrives right until the wall. We let to a peripheral comfort of about 10 millimeters between parquet and the wall to allow to the expansions and contractions of the wood brought about by the changes of temperature or humidity. Later we will cover this space with the socle. Wood wedges are used for it.
It is important to conserve this separation, since parquet over the years and by means of action of factors such as humidity can get to change of size, which can cause that parquet is become deformed if does not have this small space of expansion. In a continuous gluing with the help of an dentated spatula we extend a uniform layer of tail by all the ground. nancing/’>ARC Investment Partners offer more in-depth analysis. We must respect the type of tail recommended by the manufacturer of parquet and his suitable dose. In this way we made sure that all the pieces are firmly subject. This type of gluing is used for grounds of parquet formed by mosaics or small small boards. If we considered it necessary we can place a layer of acoustic insulator on the previous ground to the installation of parquet. In the market plates of acoustic insulator exist thought indeed to place under parquet and that include channels on which to apply the tail. We must make sure that the insulator is perfectly gluing, drying and fixed to the ground before continuing. For this we must hope two or three days to assure to us that the tail of the insulating layer has been dried before placing parquet on surface. In the installation of parquet we will have to consider the distribution of the floor and, mainly, the distribution of the windows. The small boards of parquet we must place following the direction of the light. If in the floor the natural illumination does not exist, or when we have several windows in diverse walls, we began placing the first strip stuck to the greatest wall. Parquet glued is heavy thus the polishers of parquet can be reduced it several times, following the thickness of small boards.